victron-esp32-ble-mqtt/configuration_template.yaml

33 lines
1.4 KiB
YAML

# ─────────────────────────────────────────────────────────────
# Victron SmartSolar MPPT — Home Assistant configuration.yaml
#
# Add the template section below to your configuration.yaml
# to create calculated sensors from the MPPT data.
#
# The MQTT sensors are created automatically via discovery —
# no manual MQTT config needed.
# ─────────────────────────────────────────────────────────────
template:
- sensor:
# Net power in/out of battery (positive = charging, negative = discharging)
- name: "Garage Net Battery Power"
unit_of_measurement: "W"
device_class: power
state_class: measurement
state: >
{{ (states('sensor.victron_smartsolar_mppt_battery_current') | float *
states('sensor.victron_smartsolar_mppt_battery_voltage') | float) | round(1) }}
# Simple charging status text
- name: "Garage Battery Status"
state: >
{% set current = states('sensor.victron_smartsolar_mppt_battery_current') | float %}
{% if current > 0.1 %}
Charging
{% elif current < -0.1 %}
Discharging
{% else %}
Idle
{% endif %}