# ───────────────────────────────────────────────────────────── # Victron SmartSolar MPPT — Home Assistant configuration.yaml # # Add the template section below to your configuration.yaml # to create calculated sensors from the MPPT data. # # The MQTT sensors are created automatically via discovery — # no manual MQTT config needed. # ───────────────────────────────────────────────────────────── template: - sensor: # Net power in/out of battery (positive = charging, negative = discharging) - name: "Garage Net Battery Power" unit_of_measurement: "W" device_class: power state_class: measurement state: > {{ (states('sensor.victron_smartsolar_mppt_battery_current') | float * states('sensor.victron_smartsolar_mppt_battery_voltage') | float) | round(1) }} # Simple charging status text - name: "Garage Battery Status" state: > {% set current = states('sensor.victron_smartsolar_mppt_battery_current') | float %} {% if current > 0.1 %} Charging {% elif current < -0.1 %} Discharging {% else %} Idle {% endif %}